ADD: FuMing Building, No.258 ChangMa Road, ChangPing Town, DongGuan City, GuangDong, China Mail: [email protected] Mob:+8613688929012 Tel:+86-769-82207280
Showing all 11 results
LS series is specially designed for machines installed with unilateral cantilever rollers, such as table machines, label machines and tape machines. The detection signal of LS series products varies with the change of coil tension, and is not affected by the position of coil on the roller. Meanwhile, double cantilever in diameter is used to protect the detector from damage caused by overload
KTC-818A tension controller adopts a new graphic liquid crystal display, which shows clearer in Chinese and English. It also outputs 0~24VDC control voltage command for magnetic powder clutch/brake. It can also output 0~10V voltage signal to control inverter, servo motor or Other actuators perform high-precision tension control on the coil material. Widely used in printing, packaging, paper, cable, rubber, electronic battery, textile printing and dyeing industries.
KTC-828A tension controller adopts a new graphic liquid crystal display, which shows clearer in Chinese and English, and sends 0~24VDC control voltage command for magnetic powder clutch/brake. It can also output 0~10V voltage signal to control inverter, servo motor or Other actuators perform high-precision tension control on the coil material. Widely used in printing, packaging, paper, cable, rubber, electronic battery, textile printing and dyeing industries.
KTC-838A tension controller adopts a new graphic LCD display, which can display more clearly in Chinese and English. It sends out a 0~24VDC control voltage command for magnetic particle clutch/brake, and can also output a 0~10V voltage signal to control the inverter, servo motor or other actuators to conduct high-precision tension control on the coil. It is widely used in printing, packaging, paper making, cable, rubber and plastic, electronic battery, textile printing and dyeing and other industries.
Manual Tension Controller KTC002 is easily used, small and convenient for installation. It has the stable output, adopts the high-quality components. It can be used for the process of thin film and printing, coiling machine and others which need the tension control.
KTC800A Manual Tension Controller is constituted of high-speed microprocessor and high-power switch power supply. It can be used for three operation modes: constant current, constant voltage and constant power. In addition, it can compensate the heat fading of clutch/brake automatically and the torque output is stable and reliable.
Tension signal amplifier KTC820B can be used with LX series tension sensor to amplify weak tension signal to 0~10V or 4~20mA current output, which is PLC acquisition or tension meter display
The detection signal of LS series products varies with the change of coil tension, and is not affected by the position of coil on the roller. Meanwhile, double cantilever in diameter is used to protect the detector from damage caused by overload. LS-60B(Roller length)L-(Bearing capacity)N series cantilever tension detector can be used for accurate and non-repetitive tension detection of paper, film,foil and other materials.
The power amplifier is used in combination with the closed-loop type tension control unit to amplify the output signal or such control unit, and to apply the power source to the excitation coil of clutch / brake.
The power amplifier is used in combination with the closed-loop type tension control unit to amplify the output signal or such control unit, and to apply the power source to the excitation coil of clutch / brake.
The LC hollow shaft auto tension detector measure the applied force and give an electric proportional signal, repeatable and free from hysteresys, which can be used for any kind of regulation.
© 2022 All rights reserved
Please send us your details requests here. Our team will send back the offer in 20 mins, all of your information will be protected by us.
